GE-MARC - RECALLING STORED NUMBERS, Continued
button to exit the Special Call mode and return to the normal System /
Group display.
INTERCONNECT CALL -
Once the desired individual call number
is displayed, press and release the PTT to initiate the call. The display
will show "WAIT" while the radio performs the signaling required to
obtain a working channel.
When the signaling is successfully completed, the BUSY display will
appear and the the proper DTMF tones will be sent and heard at the
speaker. When someone answers, press the PTT bar and speak directly
into the microphone. Release the PTT bar as soon as you stop talking
and wait for a reply.
If the signaling is unsuccessful, the radio is out of range or inoperative,
"NO SERV" will appear on the display, and a sequence of five beeps
will be heard at the speaker. Any subsequent attempt to initiate a call
within the next 20 seconds will be ignored. The radio can be cleared
from this mode by double clicking the M (Shift/Clr/Monitor) button.
If all available channels are busy when the call is attempted, one long
beep is heard, and BUSY is displayed. The call will not be retried
automatically.
NOTE:
If the "call retry" option is active, the radio will display
"RETRYNG" and will try the channel at twenty second intervals for
five minutes before returning to the normal System/Group display.
When the call is complete, double click the M (Shift/ Clr/ Monitor)
button to exit the Special Call mode and return to the normal System /
Group display.
32
