Wall mounting
Step 5-1 wall mounting assembly: pay attention to the direction
when installing the elbow. Install the elbow with M5 * 16 screws
(Refer
fi
gure 1-12 )
Figure 1-12
Figure 1-13
Step 5-2: determine the position of hanger to be installed on the wall,
paste the label of drilling position, align the hole location with drilling
tool, drill 4
Φ
10 holes, knock in expanded rubber particles, and screw
in ST6 * 45 self tapping screw to install the top mounting plate
assembly on the wall. Refer
fi
gure 1-14 (Suitable for wall mounting)
Step 5-3: after passing the corresponding wire rod of the projector
through the inner tube, lift the octopus with both hands (with the projector
installed) and hang it on the axial screw along the guide chute, and lock
the left and right four adjusting screws.
Refer
fi
gure 1-15 (Suitable for wall mounting)
Figure 1-14
Figure 1-15
Figure 1-16
Electric drill
Safety precautions before
installation and use
Step 5-4: reference for wall mounting commissioning
(Hoisting step 4.4)
adjusting handle
adjust screws (2 sides)
adjust
tilt
inner
hexagon
screws
(
2 sides)
adjust screws (horizontal, left,right)
！
！
Please
ensure
the
ceiling/wall
can
load
50KG to
prevent accident from happening.
Don
'
ttilttheprojectortoomuch
,
antifalling,
screws shouldbetighten.
Don't take apart any components after hanging.
No dismantle
Attention
Warning
