Network Address Server Settings (DHCP)
The Datamax 4G can act as a DHCP server for LAN connected devices. It can
also act as a DHCP forwarder where you are utilizing a central DHCP server for
multiple sites (subnets).
DHCP Type: select
DHCP Server or DHCP Forwarder as appropriate
When you select DHCP Forwarder, you will see input fields for the IP address of the
remote DHCP server as below:
DHCP Server:
Enable or disable the DHCP server
Start IP Address:
The first
(lowest)
IP address to issue when a DHCP request comes
in
–
make sure you exclude the Datamax IP address!
Maximum DHCP Users:
The maximum number of concurrent DHCP lease.
Client Lease Time:
Leased time for IP address in minutes. After this amount of time,
the client will need to acquire a new lease if it wishes to remain connected.
Static DNS (1-3):
If users wish to use their own DNS servers, users can enter their IP
addresses here. Leave blank to use WAN configured DNS servers.
WINS:
if you are using a WINS server for name resolution, you can enter its IP
address here.
DNSMasq:
Users' domain name in the field of local search, increase the expansion
of the host option, to adopt DNSMasq can assign IP addresses and DNS for the
subnet, if t DNSMasq is selected, dhcpd service is used for the subnet IP address
and DNS.
Summary of Contents for Datamax 4G
Page 1: ......
Page 49: ...DDNS Status shows DDNS specific log information...
