Accessories
Extension Modules
maxon motor control
EPOS2 Positioning Controller
Document ID: rel8458
4-29
EPOS2 Module 36/2 MoBo Hardware Reference
Edition: November 2018
© 2018 maxon motor. Subject to change without prior notice.
Note
*1) Voltage level “low” = 0 V, “high” = 3.3 V, connected directly to the DSP
*2) EIA RS232 Standard
*3)Total ampacity on voltage 5 VDC is 150 mA and divides as follows:
• Encoder supply v5 VDC/100 mA
• Hall sensor supply v5 VDC/30 mA
• Auxiliary output v5 VDC/20 mA
P
OWER
LED (P
WR
)
Illuminated by motherboard’s +5 VDC rail.
Figure 4-29
Power LED (Pwr)
