Motherboard (407582)
Connections
maxon motor control
EPOS2 Positioning Controller
Document ID: rel8458
3-19
EPOS2 Module 36/2 MoBo Hardware Reference
Edition: November 2018
© 2018 maxon motor. Subject to change without prior notice.
3.1.9
CAN Bus Connector (J9 & J10)
Used to pass CAN data between adjacent boards on CAN bus. Both links can be used for CAN in &
CAN out.
Figure 3-11
CAN Bus Connector (J9 & J10)
Table 3-7
CAN Bus Connector – CAN Link Cable
Pin
Signal
Description
1
CAN GND
CAN Ground
2
CAN low
CAN low bus line
3
CAN high
CAN high bus line
CAN Link Cable
Type
3 x AWG 26
Length
75 mm
Head A
3-way JST PH connector
Head B
3-way JST PH connector
