Motherboard (407582)
Connections
maxon motor control
3-18
Document ID: rel8458
EPOS2 Positioning Controller
Edition: November 2018
EPOS2 Module 36/2 MoBo Hardware Reference
© 2018 maxon motor. Subject to change without prior notice.
3.1.7
VCC Board-to-Board Powerlink (J7a & J7b)
Used to bridge V
CC
between adjacent boards. Bridges J7a / J7b / J1 [Pin 2].
Figure 3-9
VCC Board-to-Board Powerlink (J7a & J7b)
Maximal permitted electrical Load
• Max. current powerlink (J7a/J7b): 10 A @ 20C°
• Max. current power input connector (J1): 13 A
3.1.8
GND Board-to-Board Powerlink (J8a & J8b)
Used to bridge GND between adjacent boards. Bridges J8a / J8b / J1 [Pin 1].
Figure 3-10
GND Board-to-Board Powerlink (J8a & J8b)
Maximal permitted electrical Load
• Max. current powerlink (J8a/J8b): 10 A @ 20C°
• Max. current power input connector (J1): 13 A
