maxon motor 534130 Hardware Reference Manual Download Page 2 | Manualshive

Page: 2 / 104

background image

maxon motor control

A-2

Document ID: rel8003

EPOS4 Positioning Controller

Edition: May 2018

EPOS4 Module/Compact 50/5 Hardware Reference

© 2018 maxon motor. Subject to change without prior notice.

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About the Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About the Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Specifications

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Thermal Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Generally applicable Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Pin Assignment for Module Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Pin Assignment for Connector Boards & Compact Versions . . . . . . . . . . . . . 21

3.3.1 EPOS4 CB 50/5 CAN (534133) / EPOS4 Compact 50/5 CAN (541718)  . . . . . . . . . . .   21
3.3.2 Cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   21
3.3.3 Tools  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   22
3.3.4 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23
3.3.5 DIP Switch Configuration (SW1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   35
3.3.6 Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   37

Connection Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.4.1 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   38
3.4.2 Logic Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   39
3.4.3 Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   40
3.4.4 Hall Sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   41
3.4.5 Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   42
3.4.6 Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   44
3.4.7 Digital I/Os . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   55

T

ABLE

OF

C

ONTENTS

READ THIS FIRST

These instructions are intended for qualified technical personnel. Prior commencing with any activities

…

• you must carefully read and understand this manual and
• you must follow the instructions given therein.

EPOS4 Module 50/5 and EPOS4 Compact 50/5

positioning controllers are considered as partly completed machinery

according to EU Directive 2006/42/EC, Article 2, Clause (g) and

are intended to be incorporated into or assembled with

other machinery or other partly completed machinery or equipment

.

Therefore, you must not put the device into service

,…

• unless you have made completely sure that the other machinery fully complies with the EU directive’s requirements!
• unless the other machinery fulfills all relevant health and safety aspects!
• unless all respective interfaces have been established and fulfill the herein stated requirements!

«
1
2
3
4
...
»

Summary of Contents for 534130









































































































Reviews:

No comments

Related manuals for 534130

ControlMaster CM15

Brand: ABB Pages: 28

Brand: C&K systems Pages: 2

Brand: Warren Controls Pages: 16

Brand: Cansec Pages: 45

Brand: Cansec Pages: 43

Brand: Cansec Pages: 32

Brand: Harmonic Drive Pages: 25

Brand: Nelson Pages: 8

Brand: QUAD Pages: 17

Brand: fadini Pages: 16

Brand: jablotron Pages: 2

Brand: vacuubrand Pages: 12

Brand: Vacon Pages: 47

Brand: Vacon Pages: 40

Brand: Valco baby Pages: 24

Brand: Watlow Pages: 4

Brand: Eaton Pages: 448

Brand: Eaton Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands