Position the armrest on the seat and replace the flat
washers, the spring washers followed by the M8 screws.
Use the universal tool to tighten the 3 screws.
Now remove the pre-mounted M8 screws from
both sides of the backrest.
The lateral adjustment head should show
to the front edge of the chair.
1
2
3
4
5
6
DO NOT use this lever before the backrest has
been assembled! RISK OF INJURY !!!
Unpack the contents of the box.
Tip: Use the foam packaging to protect any
damageable floor.
In case of two pre-mounted
armrests start with point 5 please!
Begin with the assembly of the second armrest. Herefore
you need to turn the seat upside down and remove the
3 pre-mounted M8 screws with the spring washers and
flat washers. Use the universal tool provided.
12
