- 6 -
REAR PANEL
1. Main Power Input Socket
6. Mic 3 Input Jack
11. AUX 3 Input Jack
2. Power Fuse
7. Mic 2 Input Jack
12. AUX 2 Input Jack
3. Earth Connection Screw
8. Mic 1 Input Jack
13. AUX 1 Input Jack
4.DC 24V Power Supply Terminals
9. Pre Out Jack
5. Speaker Output Screw Terminals
10. Record Out Jack
4. Power Source
AC Power Source
The supply transformer has been designed for use on either 230Vac, selected by a push
switch on the rear panel. The amplifier is factory set at 230Vac mains voltage.
DC Power Source
Battery Connection (24Vdc)
When using external batteries, earth the amplifier via the screw terminal because of the
high voltages present. Electrical stability of the system is increased by earthed the case.
NOTE:
The connection cable must be fitted with an in-line fuse; suggest to using
quick-blow type F8A. When Connect batteries, please ensure correct polarity.
5. Connection
Microphone Connection
Mic1~3
inputs are unbalanced standard 1/4” phone jack on the rear panel.
1/4” Phone Jack Plug (Balanced operation)
