Maxkon RAINBOW 2000 Installation & Operating Instructions Manual Download Page 2

IMPORTANT SAFETY PRECAUTIONS

 

READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE.

 

Failure to observe these instructions will invalidate the 
warranty. This unit may be a source of possible shock. 
Disassemble only to replace lamp. No user-serviceable 
parts inside. Source of possible ignition. 

 

    

WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: 

1.

 

Fragile Glass Lamp. Use care when unpacking, handling and installing . 

2.

 

This   appliance  must  be disconnected  from its power source during installation or  service  activities and 
when replacing. 

3.

 

DO NOT use this heater below an installation height of 2.4m with a programmer, timer or any other device 
that switches the heater on automatically. 

4.

 

When mounted on a stand (available separately) DO NOT use this heater in the immediate surroundings of a 
bath, shower or swimming pool. 

5.

 

In order to avoid overheating and potential fire hazard, DO NOT cover the heater. DO NOT cover the heater with 
insulating material or a similar material under any circumstances. 

6.

 

DO NOT install the heater pointing directly downwards and maintain at least 500mm from ceiling or other 
objects. 

7.

 

DO NOT  touch  the  heater when in use. The heater rises to very high temperatures in use. After the heater has 
been switched off let the heater completely cool down before touching it. 

8.

 

DO NOT use the heater if the power cord is damaged. This must be replaced by the manufacturer, its 
service agent or similarly qualified persons in order to avoid a hazard. 

9.

 

DO NOT use the heater to ignite materials. 

10.

 

This heater must only be used for the heating of people outdoors or indoors in an unenclosed space. The 
heater is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack 
of experience or knowledge, regardless of whether they have been given instruction or are under supervision. 
Children should be kept away and should not be left unsupervised around the unit. 

11.

 

All operators shall only switch on/off the appliance provided that it has been placed or installed in its 
intended normal operating position and they have been given supervision or instruction concerning use of 
the appliance in a safe way and understand the hazards involved. Children shall not plug in, switch on or 
regulate the appliance or perform user maintenance including cleaning. 

12.

 

The  appliance  is  not  to  be  used  by  persons  (including  children)  with  reduced  physical,  sensory  or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction . 

13.

 

children being supervised not to play with the appliance  

14.

 

Statement: heater is not located immediately below a socket-outlet  

15.

 

The heater must not be used if the glass (or ceramic or similar material) panels are damaged  

16.

 

WARNING: This heater is not equipped with a device to control the room temperature. Do not use this 
heater in small rooms when they are occupied by persons not capable of leaving the room  on their 
own, unless constant supervision is provided.  

17.

 

IMPORTANT: Ensure supply voltage does not exceed 245 volts. 

 

 
 
 

Summary of Contents for RAINBOW 2000








Reviews: