Your
FIRE PIT
is ready for use!
Step 4 For Table: Put the Steel Table Top (N) onto the assembled firepit frame. Then
Table is ready for using.
Step 5 For BBQ: Put the BBQ Grill (D2) onto the assembled frame. Then BBQ is ready
for cooking.
Step 6 For Cooler
Place the Ice Bowl (M)
on the
assemble firepit base.
The cooler
is ready for using
WARNING:
FOR OUTDOOR USE ONLY
FOR YOUR SAFETY:
1. Improper installation, adjustment,alteration,service or maintenance
can cause injury or property damage.
2. Read the installation, operation, and maintenance instructions
thoroughtly beforeinstalling or servicing this equipment.
3. Failure to follow these instructions could result in fire or explosion,
which could cause property damage, personal injury, or death.
OPERATING INSTRUCTIONS
Lighting
1. make sure there is only a small amount of ash in the bottom of the bowl.
2. place a layer of dry kindling or a natural firestarter onto the center of the
grate.
3. place above that a layer of dry seasoned hardwood that is cut to lengths no
more than 3/4 the diameter of the bowl.
4. use a match to light kindling or firestarter.
5. using a hook and heat resistant gloves,replace spark guard once the
kindling or firestarter is lit.
Tending the fire
You may need to shift and/or add logs for an ideal experience.
CAUTION: DO NOT
place a hot spark guard or hot fire bowl tools onto
combustible surfaces such as grass, wooden deck or furniture.
1. Using a hook and heat resistant gloves, carefully remove spark guard.
2. While using a long handled fire pit tool, shift coals and logs to allow additional
airflow.
3. DO NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or
enhance an existing fire.
