Maximum 7855, User Manual

Page: 14 / 88

14
4.2.ChAnnEl SEARCh
4.2.1 Terrestrial Channel Search
By selecting Auto Search the receiver will scan all terrestrial channels.
It is also possible to search by one channel. Select wanted channel by << / >> keys
and change function from Auto search to Manual search than pres OK. Receiver
will now only search for selected channel. It is also possible to search by frequency
if pres RED key and enter wanted frequency.
4.2.2 Satellite Channel Search
1. Antenna : Select your antenna number.
2. Satellite : Select desired satellite using << or >> keys. You can see the
information of selected satellite on the right side.
You can edit certain preprogrammed data such as Transponder, Frequency, Symbol Rate, Polariza-
tion and 22 KHz directly.
3. Position : After selecting a satellite, please select Position button and then
keep pressing << or >> keys on the RCU until the selected satellite is locked.
If the satellite is locked correctly, the color of the signal label bar will change to
orange. When you press OK key on the RCU, the message “Would you like to
set the value of current position?” will be displayed. This function can only be
used with if USALS motorized function is selected.
4. Transponder : Select desired transponder using << or >> keys. By pressing
the OK key there will be displayed a Down List Box which also lets you select
the desired transponder.