25
TROUBLESHOOTING
PROBLEM
CAUSE OF THE PROBLEM
SUGGESTED
CORRECTIVE ACTION
The motor does not
start.
The tool is not connected to a
power source.
Connect the tool to a
power source.
The blade does not
follow a straight line.
1. Teeth are dull. This is
caused by hitting a hard
object such as a nail, dulling
teeth on one side. The blade
tends to cut to the side with
the sharpest teeth.
1. Replace with a new
sharp blade.
2. Edge guide or straight
edge is not being used.
2. Use an edge guide
or straight edge.
The blade binds or
smokes from friction.
1. Blade is dull.
1. Replace with a new
sharp blade.
2. Blade is on backwards.
2. Install the blade
correctly.
3. Blade is bent.
3. Replace with a new
blade.
4. Workpiece is not properly
supported.
4. Clamp the
workpiece correctly
and tightly.
5. Incorrect blade is being
used.
5. Use the correct
blade.
If the problem remains unsolved after performing the checks described above,
call the toll-free helpline at 1-888-670-6682.
TROUBLESHOO
TING