Maximum 054-7160-8, Instruction Manual

Page: 3 / 14

4
model no. 054-7160-8 | contact us 1-888-670-6682
5
S
AFETY INS
TRUCTIONS
MOTOR 18V DC
KEYLESS CHUCK 1/2” (12.7 mm) METAL, single-sleeve
VARIABLE SPEED RANGES 0-560/0-1900 RPM (no load)
TORQUE CLUTCH POSITION 16 including drilling mode
MAX. TORQUE 550 in-lb
ON BOARD WORK LIGHT LED
BATTERY 20V max* (2.0 Ah) X-treme lithium-ion
COMPATIBLE MAXIMUM BATTERY 054-3203-2 (2.0 Ah); 054-3206-6 (4.0 Ah)
CHARGER
35-minute, diagnostic
COMPATIBLE MAXIMUM CHARGER 054-3204-0 & 7109-B-2
OPTIMUM CHARGING
TEMPERATURE
40-104°F (4-40°C)
DIMENSIONS 6 13/16 x 8 1/8 x 2 5/8” (173 x 206 x
66.5 mm)
WEIGHT 2 lb 13 oz (1.26 kg) without battery
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
TECHNICAL SPECIFICATIONS
TE
CHNIC
AL SPE
CIFIC
A
TIONS
GENERAL POWER TOOL SAFETY WARNINGS
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions
can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adaptor plugs with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool
will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is unavoidable, use a Residual
Current Device (RCD) protected supply. Use of an RCD reduces the risk of electric
shock.
WARNING!
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.