background image

TM

5

GENER

AL PO

WER T

OOL S

AFETY W

ARNINGS

WARNING!

Some dust created by power sanding, sawing, grinding, drilling 
and other construction activities contains chemicals known to 
the state of California to cause cancer, birth defects or other 
reproductive harm. Some examples of these chemicals are:

• 

Lead from lead-based paints,

• 

Crystalline silica from bricks and cement and other masonry 
products, 

• 

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often 
you do this type of work. To reduce your exposure to these 
chemicals, work in a well ventilated area, and work with approved 
safety equipment, such as those dust masks that are specially 
designed to filter out microscopic particles.

WARNING!

Read all safety warnings and instructions. Failure to follow the 
warnings and instructions may result in electric shock, fire and/or 
serious injury.  

Save all warnings and instructions for future reference.

• 

The term power tool in the warnings refers to your electric 
(corded) power tool or battery-operated (cordless) power 
tool.

WARNING!

This product may contain lead, phthalates or other chemicals 
known to the state of California to cause cancer, birth defects and 
other reproductive harm. Please wash your hands after use.

FPO

FPO

FPO

WORK AREA SAFETY

• 

Keep work area clean and well lit.

 Cluttered or dark areas invite accidents.

• 

Do not operate power tools in explosive atmospheres, such as in the presence 

of flammable liquids, gases or dust.

 Power tools create sparks which may 

ignite the dust or fumes.

• 

Keep children and bystanders away while operating a power tool. 

Distractions 

can cause you to lose control.

Summary of Contents for 054-2016-4



















Reviews: