background image

Installation Guidelines:

Antenna

 

installation

:                                                                                                 

                    1)   Make sure Outdoor Unit antenna in installed min 

8 feet

 above ground.                               

 

                          (This ensures good range and avoids antenna vandalism)

      2)   Ensure antenna is not installed against any metallic surface. To avoid     
             reducing radio range install antenna at least 24” away from steel post or   
             building structure (see figure 1).

3) After wire installation, ensure enclosure knockouts are properly 

sealed– to avoid water intrusion.       

         

Outdoor Unit 

installation

:

1) Open enclosure - using key.
2) Disconnect 6-inch antenna extension cable inside enclosure.(Figure 2)
3) Remove the front door by removing the two hinge screws. (Figure 2)
4) Remove knockouts (back or bottom – as necessary) and fish wires   

through knockout.

5) Mount back enclosure using mounting holes.
6) Re-install front door using two hinge screws.
7) Re-connect 6-inch antenna extension cable inside enclosure.
8) Follow wiring and setup instructions for Outdoor Unit.
9) Run 6-foot antenna extension cable as necessary and mount antenna.
10) Screw 6-foot antenna extension cable on back of enclosure and run

cable as necessary to antenna location.

11) Mount antenna and ensure that it is hand tight.

-3-

Figure 8

Figure 9

Figure 10

-12-

Summary of Contents for Aeromax









Reviews: