P13
ADVANCED OPERATIONS
Safety Training Information
WARNING
Your radio generates RF electromagnetic energy while in transmit mode.
This radio is designed for and classified as "Occupationa Use Only",
meaning it must be used only by individuals aware of the hazards and
the ways to minimize such hazards. This radio is NOT intended for use
by the "General Population".
Caution
To ensure that your exposure to RF electromagnetic energy is within
the allowable limits for occupational use, always adhere to the following
guidelines:
DO NOT operate the radio without a proper antenna attached, as this may
damage the radio and may also cause you to exceed RF exposure limits.
A proper antenna is the antenna supplied with this radio by the
manufacturer or an antenna specifically authorized by the manufacturer
for use with this radio.
DO NOT transmit for more than 50% of total radio use time ( "50% duty
cycle"). Transmitting more than 50% of the time can cause RF exposure
compliance requirements to be exceeded. The radio is transmitting whe
the "TX indicator" lights red. You transmit by pressing the "PTT" switch.
ALWAYS use authorized accessories (antennas, batteries, belt clips,
speaker/mics, etc). Use of unauthorized accessories can cause the RF
exposure compliance requirements to be exceeded.
ALWAYS keep the antenna at least 2.5cm (1 inch) away from the body
when transmitting and use only the provided clips when attaching the
radio.
Summary of Contents for Max-728
Page 1: ...Max 728 VHF UHF Transceiver User Manual...
Page 12: ...P10...
Page 13: ...P11...
Page 14: ...P12...