maximal FD100T, Operation & Maintenance Manual, Page: 7 / 115

5-10t Internal Combustion Counterbalance Forklift Truck Operation & Maintenance Manual
-7-
16. The forklift trucks with attachments shall be operated as loaded forklift trucks during
unloaded operation.
17. Don’t convey unfixed or loosely stacked cargo, and take care when cargo of relatively
large size is conveyed.
18. Drop the fork onto the ground, put the handle for gear position to neutral gear, and turn off
the engine or disconnect the power supply when driver leaves the truck. Pull the parking
brake device properly when truck is parked on a ramp, while wedge blocks must be used to
fill up the wheels when the truck is to be parked there for a long time.
19. It is not allowed to open radiator cover carelessly, under the condition when engine is very
hot.
20. The pressures of multi-way valve and safety valve have been properly adjusted before
delivery of forklift truck from factory, and users shall not adjust them at discretion during use,
to avoid damage of entire hydraulic system and hydraulic components due to excessively high
adjustment.
21. The value of air pressure specified on the label plate of “Tyre Air Pressure” shall be
followed for tyre air charge.
22. The maximum noise outside the forklift truck is not to be larger than 89dB (A), and
JB/T3300 shall be followed as test method.
23. Get familiar with and pay attention to the functions of various data plates on the forklift
truck.