• First, place the steam cleaner on a level platform, push down
the safety cover, unscrew the safety cap counterclockwise, and then
install the funnel. As chatting: Take 175ml clean water with the
measuring cup, and add the water into the tank.
(Max. capacity of the tank is 250ml. Do not overfill the tank
and some space must be left in the tank). Re-install the safety cap
and tighten it in position
• Check the power supply and socket, and confirm they comply
with the requirements given in the User Manual. Then turn on the
power supply.
• About 4 minutes after power supply is turned on, steam is ready.
At this time lightly press the steam button and check
whether steam is sprayed out of the nozzle.
(Do not aim the spray nozzle at other persons or objects).
• If there is steam sprayed out, please install suitable accessories
according to your needs after you release the button.
• Press down the steam button again in order to carry out
the operations required by you.
HOW TO USE
• Install the spray cup with hairbrush
Hold the pipe section of the spray cup with
hairbrush in your hand, align the arrow on
the spray cup with the single-line mark on short
spray nozzle on the machine body, and insert
the spray cup in position. Rotate the spray cup in
clockwise direction, and align the arrow
on the spray cup with the double-line mark
on short spray nozzle on the machine body,
as shown in Figure 1.
Fix the spray cup on the machine body.
To remove the spray cup with hairbrush, please
rotate the spray cup inversely (counterclockwise)
as shown in Figure 2,
and align the arrow on the spray cup
with the single-line mark on the machine body.
Then the spray cup with hairbrush
can be pulled out.
(1)
(2)
12
