Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Operation
•
Check if appliance is assembled correctly.
•
Position a glass, cup or container underneath the outlet.
•
Cut large pieces of fruit/vegetables into smaller portions.
•
Switch on the appliance using the “ON/OFF” switch located at the side.
•
Remove the pusher and feed fruit/vegetables down the inlet shaft using the pusher (apply light pressure
only). WARNING! Never use your hands or other items to push product down the shaft.
•
TIP! Process waste material again to extract up to 50% more juice from same amount of product.
•
If the filter becomes clogged during production, remove and clean it.
•
Immediately clean the filter after use.
•
When not in use, switch off the machine using the
“
ON/O
FF” switch.
•
If the appliance will not be used for a longer period, please remove the plug from the main socket. Clean the
appliance according to instructions (see chapter “
Cleaning and Maintenance
”)
.
Troubleshooting
The follow overview will help you understand the control panel and possible problems. However, only qualified
engineers should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The appliance does not work.
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
▪
Safety clamp not closed
properly.
➢
Switch on the appliance.
➢
Check the power supply, plug
in power cable.
➢
Use another power source.
➢
Close safety clamp.
The appliance has stopped
working.
▪
Motor overheated.
▪
Overload.
➢
Let appliance cool down and
reduce load (weight/time).
➢
Reduce load.
The appliance does not extract
juice properly
▪
Overload.
▪
Filter clogged.
▪
Filter damaged.
➢
Reduce load.
➢
Clean filter.
➢
Replace part.
