E
N
G
LI
S
H
7
OPERATION
1
Open the lid to add your product to the storage cylinder.
2
Make sure the nozzle is properly secured in place with the clamp.
3
Insert the nozzle into desired location.
4
Use the handle to pump and dispense the product at the inserted location.
5
Clean the appliance after use (see chapter "Cleaning and Maintenance").
TROUBLESHOOTING
The following overview will help you understand possible problems. However, only qualified technicians
should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The filling does not come out
of the nozzle.
]
Nozzle is clogged or blocked.
]
Cylinder or piping clogged or
blocked.
]
Filling is too thick.
f
Remove, check and clean the nozzle.
f
Check and clean the cylinder and piping.
f
Use thinner filling.
The pump does not work.
]
Pump damaged or defective.
f
Repair or replace pump.