- 5 -
INSTRUCTIONS FOR USE
1. The
HORNET
Model XTR05 is specifically designed for use in ‘Spin’ Cycle
classes, fitness studios and health clubs. The bike uses a fixed wheel drive
flywheel and should only be used with professional supervision or instruction.
2.
Assembly:
It is important that the bike is correctly assembled, and we
recommend that the installation and assembly be undertaken by suitably
qualified personnel. Detailed Assembly instructions are supplied separately
with an unassembled bike. If your bike was supplied preassembled follow the
service and maintenance instructions later in this manual. If you have
assembled the bike yourself ensure that all assembled procedures are correct
and recheck that all assembled parts are fully tightened. Recheck if necessary.
3.
Location:
The bike should be placed in the desired location and then checked
that it is both level and stable. Each ground tube has adjustable leveling feet
located on the underside of each corner. Ensure that each of the leveling feet
are in a fully inserted position (Fully rotated CW when viewed from bottom)
Rotate feet CCW until the bike is both level and stable.
4.
Handlebar And Seat Stem Adjustment
It is important that the handlebar and seat height adjustments are correctly set
for your particular body dimensions – if you are undertaking any of the
various classes using spin cycles then your instructor will advise you as to the
correct adjustment procedures relative to the program you are undertaking.
Incorrectly adjusted bikes may produce can produce excessive strain, soreness
and / or irritation of muscles and joints.
The instructions that follow are to assist with bike set up
should you not have an instructor to advise you as to correct
and proper procedures.
