Do not let the cord hang over the edge of a bench, table or to touch hot surfaces.
Do not use extension cord with this appliance.
After use, do not wrap the cord around the appliance as in time this may cause the cord to fracture. Coil cord
loosely by side of the appliance in storage.
For additional protection, the installation of a residual current device (RCD) with a rated operating current not
exceeding 30mA is advisable in the electrical current supplying the bathroom. Ask your electrician for advice.
Before cleaning, always turn the appliance off, switch off at the power outlet, and unplug at the power outlet.
Allow the appliance to completely cool before undertaking any cleaning.
Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
Do not place on top of any other appliance.
Do not leave appliance unattended when plugged in or switched on.
Use this appliance only for its intended use and described in this instruction booklet.
Take care to avoid the hot surfaces of the appliance coming into direct contact with the skin, in particular the
eyes, hands, ears, face and neck.
This appliance is not intended for commercial use.
FEATURES
ACCESSORIES
1. One pothook
2. 2 x pieces of toggles
3. 2 x pieces of screws
BEFORE FIRST USE
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage,
please take the unit back to place of purchase for a replacement.
INSTALLATION
HOW TO INSTALL THIS UNIT WITH PLUG-CONNECTED WIRE:
1. Drill 2 holes of 6mm diameter, and the distance is 40mm between the two holes.
1.
Dryer Body
2.
Holder
3.
Spring Button
4.
Power Switch
5.
Switch
WARNING:
Do not install hair dryer in wet or damp affected areas.
