RMT55H
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.621-2789
32
10
STORAGE
10.1
Engine
1.
If your tiller is to be stored over 30 days, please see your Engine Owner’s Manual for
storage information. The engine should be completely drained of fuel to prevent gum
deposits from forming on essential carburetor parts, fuel filter, fuel lines and tank.
2.
Refer to engine manual for further engine storage procedures.
10.2
Tiller
1.
At the end of the season or if tiller is to be stored for any length of time it should be
cleaned following the cleaning instructions in Section 8.6.
11
TRANSPORTING
To transport tiller from garden to storage area:
1.
Move the throttle control to idle position.
2.
Turn ON/OFF switch to
OFF
position.
3.
Turn fuel supply valve off at carburetor supply shut off.
4.
Place wheels in down position by pulling the spring-loaded locking pin from the wheel
yoke and repositioning the wheel frame bar allowing the spring-loaded pin to reposition
and lock wheels in the up position.
5.
Raise drag stake. This is done by pulling the spring-loaded locking pin from the drop stake
locking hub and sliding the drag stake up.
