ASSEMBLY INSTRUCTIONS
1. Get help to unpack all parts -- drum, hitch assembly, wheels, wheel bracket, and bolt package.
2. Place washer on 2” x 1/2” bolt. Put it through the Pillow Block Bearing attached to the drum.
3. Put the hitch assembly on the bolt, followed by the wheel bracket.
4. Place lock washer and nut on bolt, then tighten with a 3/4” wrench. Repeat for other bolt.
5. Repeat for the two bolts on the other side of the aerator and lawn roller.
6. Place wheel on axle.
7. Thread cotter pin through hole on axle. Splay end so cotter pin stays attached.
8. Repeat on other wheel.