Maxim Integrated │
2
www.maximintegrated.com
Evaluates: MAX86140 and MAX86141
MAX86140/MAX86141
Evaluation System
6) Connect USB-C cable or LiPo Battery to the Data
Acquisition Board to power up the EVSYS. If LiPo
battery is used, press the power switch (SW) to turn
on/off the device. When powered on, the green LED
will toggle.
7) After that, start the MAX86140 EVSYS GUI program.
“Connect Device” will appears, choose your device
and press “Connect” as shown in
Figure 11
.
8) The GUI will then be launched as shown in
Figure 12
.
9)
Configure the EVSYS on the GUI and Click on the
<Start> button on the bottom left side to start the
data acquisition.
10) When running, the LEDs on the Micro PCB should
illuminate and the plots on the GUI should stream
with data as shown in
Figure 13
and
Figure 14
.
Figure 1. Setup MAX86140 EVSYS GUI Software Step 1
