LMU Evaluation Kit User Manual
4
Rev 1
1 Introduction
The LMU evaluation kit (EV kit) demonstrates the capability of the LMU for monitoring a
single-phase or split-phase AC load using up to two voltages and two currents (sensors included). The EV kit
connects to a PC through a USB cable that provides both power and data communication to the board. A
Windows®-based graphical user interface (GUI) communicates with the device over a virtual for simplified
access to measurement data and controls.
1.1 Ordering Information
PART
TYPE
LMUEVK1#
Evaluation Kit
#
Denotes a RoHS-compliant device that may include lead that is
exempt under the RoHS requirements
.
1.2 Package Contents
The LMU EV kit includes the following:
•
LMU Evaluation Board
•
Two 20A Current Transformers
•
USB Cable Assembly USB A-B 28/24 1.8M (Tyco/Amp 1487588-3)
•
CD with Documentation, GUI Application, and USB Drivers
•
Calibration Coefficients Document (Hardcopy Only)
1.3 System Requirements
In addition to an AC source and load for measuring, the EV kit requires a Windows PC with the following
features:
•
1GHz processor and 1GB RAM
•
Minimum 1024 x 768 video display resolution
•
Available USB port
•
Microsoft Windows 7 or Windows XP®
Windows and Windows XP are registered trademarks of Microsoft Corp.
