Operation instructions
10
Timer-setting
Example: set an operation after 9.5 hours
Timer operation mode
I FEEL
I FEEL
I FEEL
HI
HI
HI
h
h
LOW
LOW
LOW
I FEEL
HI
h
LOW
1
3
2
It is convenient to set the timer on with "TIMER" button when you go out in the morning
to achieve a comfortable room temperature at the time you go home. You can also set
timer off at night to enjoy a good sleep.
Setting a switch-on
timer when the
appliance is off.
Setting a switch-off timer
during operation.
Press the TIMER button, "h" flashes on the LCD, then you can set the timer.
Each time the button is pressed, the set time increases by half an hour within 10 hours;
increases by one hour beyond 10 hours.
The timer range can be set is 0.5 hour to 24 hours.
As time goes by, LCD displays the remained time.
The previous set time is stored and the next set time begins with the previous set one.
On- timer and off-timer can not be set at the same time.
The TIMER indicator on the front panel lights up when timer is in use, and lights off
when it is finished or canceled.
The room may not reach your desired temperature within the preset time because of
different size of room.
Set the operating mode, temperature and indoor fan speed first, then
press the "TIMER" button until "9.5h" appears.
Point the remote controller at the signal receiving section of the indoor unit,
press the "SET" button when the letter "h" flashes.
A "beep" can be heard:
Timer indicator on the indoor unit lights up.
Letter "h" stops flashing.
To cancel the set timer: press the "CAN" button, a "beep" can be heard
and the timer indicator on the indoor unit lights off.
FAN
ON/OFF
TEMP
SLEEP
SWING
MODE
CAN
SET
TIMER
1
1
3
2
