3
.
HOW TO USE
……
BEFORE USING FOR THE FIRST TIME:
Carefully unpack the product and remove all packaging materials. To
remove any dust that may have accumulated during packaging, simply wipe
the toaster
‟
s exterior with a clean, damp cloth. Do not use abrasive
cleansers. Do not put the toaster, cord or plug in water or any other liquid.
Know your toaster
‟
s parts.
USING YOUR TOASTER:
Toast Shade Selection Dial
The shade selector dial is located on the front of the toaster. Simply turn
the dial to the desired toast shade, 1 to 2 for light toasting, 3 to 4 for
medium toasting or 5 to 7 for dark toasting. For your first toasting, it is
best to position the shade selector dial in the middle (3-4), and then adjust
each subsequent toasting to your preference.
TOASTING:
Place your toaster on a flat, level surface. Insert bread into a toasting slot.
Press the toasting lever located on the end of your toaster downward until
it locks into place. This will lower the bread into position and automatically
begin toasting. The toast will pop up when it has reached the selected
shade. Should you desire to stop the toasting before reaching the selected
shade, press the
„
CANCEL
‟
button and the toast will pop up.
When you press the toasting lever down at the start of the toasting cycle,
or when you use the
„
CANCEL
‟
button to raise the toast, you may notice a
small flash of light in the toast slot at the end opposite the toasting lever.
This is a spark caused when the power switch opens and closes and is normal
with any high-wattage appliance.
