6 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
BEFORE FIRST USE
1. Remove all printed documents and packaging materials
from the machine.
2. Pull out all removable parts and wash gently with hot
water. Dry all parts thoroughly before assembling.
3. Do not operate the fryer without enough oil in the oil tank.
4.
The Deep Fryer should always be placed on a flat and
stable surface where the power cord is out of reach from
children and away from accidental entanglement.
NOTE:
Do not immerse the
Power Cord, Control
Box Assembly or
Heating Element of
the deep fryer into
any liquids.
HOW TO USE
ASSEMBLY:
1. Make sure the Deep Fryer is unplugged when assembling.
2. Make sure the temperature control knob is set to the OFF
or 0 position.
3. Assemble the control box (2) onto the main body frame
(16). Make sure the control box is secured properly to
the slots on the back of the body frame. This will properly
engage the small safety switch (18) and ensure proper
activation. Otherwise the fryer will not power on properly.
4. Remove the frying basket (9) and allow it to hang and rest
on the backside of the oil pan.
5. Use only good quality frying oil such as peanut, vegetable,
pure corn, sunflower, canola, or light olive.
6. Fill oil into the oil container approximately between the
MIN marking and the MAX marking. Do not fill over the
MAX marking or lower than the MIN marking.
TIPS:
1. When you fry several different kinds of food, always fry the
food that uses the lowest temperature setting first.
2. Do not mix different types of oil for frying.
3. Frying already pre-cooked foods may take less time to fry
than completely raw food.
4. Replace the oil after each 10-15 uses or earlier if the oil
becomes brown and thick.
WARNINGS:
1. THIS DEEP FRYER IS ONLY SUITABLE FOR USE WITH OIL
OR LIQUID FAT AND NOT SOLID FAT. IF SOLID FAT IS USED,
WATER CAN BECOME TRAPPED INSIDE AND THE HOT FAT
MAY SPEW OUT WITH CONSIDERABLE FORCE.
2. Never switch on the deep fryer without oil or liquid fat,
as this could damage the machine. Also, do not place any
other liquids such as water or other substances in the pan.
3. Place the deep fryer on a dry, stable surface. Since the
deep fryer becomes hot during use, make sure that it is
not too close to other objects.
TIP:
When frying, is not
recommended to mix
oils.
Summary of Contents for EDF-3500
Page 2: ......
