72
Aircraft Information
71
This restraint is certified for aircraft use.
Install the child restraint in a window seat to avoid
blocking the aisle. If the aircraft lap belt is too short,
ask the flight attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating that this
child restraint is certified for aircraft use.
There is an airplane certification
label located on the back of this
child restraint as shown.
Rear-Facing Aircraft
Installation
Follow pages 56-60.
Attach 1st Harness Strap
Loops to Splitter Plate
Sewn ends of the harness strap
loops
must
face towards you.
Do not
twist harness strap or
harness adjustment strap.
Make sure the
same
harness
strap loops are fi tted
completely on
both sides of
the splitter plate.
sewn
end
10
If you cannot achieve a snug harness fi t for your child,
see page 16. To learn how to check harness tightness,
see pages 26-28.
WARNINGS:
Make sure harness height is correct
for your child’s size.
Harness system must be installed correctly.
Failure to follow these steps can result in serious
injury or death.