Choose “TV” as your main picture using the
INPUT
select key on the remote control. Activate
the Picture-in-Picture mode by pressing
PIP
on the remote control. Using the
SOURCE
button
on the remote, toggle through the inputs until you arrive on AV1 as your sub-picture on the
display. Your first channel is being selected and displayed using the internal tuner on the display
(use the remote control for the display to select this channel). Your second channel is being
selected by your VCR and displayed through the AV1 input (you would use the remote provided
with your VCR to select this channel).
This example is just one possibility. Please refer to the user manual for additional combinations.
Q: I can see the picture, but I cannot get any sound?
A:
Some things you may want to check on the Maxent 27” LCD.
If you are using the Composite (Referred to as AV1 or AV2) input you must connect the Red and
White audio connections on the right next to the Video input. You would have a total of 3
connections running from your source (DVD, VCR, etc.) to the back of the monitor (Yellow for
Video, Red for Right Audio, and White for Left Audio). Please refer to pages 14 and 15 of the
user manual for additional detail.
If you are using the S-video (Also referred to as AV1 or AV2) input you must connect the Red
and White audio connections on the right next to the S-Video input. The S-video input is a single
black multi-pin connection. You would have a total of
3
connections running from your source
(DVD, VCR, etc.) to the back of the monitor (Black for Video, Red for Right Audio, White for
Left Audio). Please refer to pages 14 and 15 of the user manual for additional detail.
If you are using Component Video input (Component 1 or Component 2) you must connect the
Red and White audio connections on the right in line with the Component Video inputs. You will
have a total of
5
connections running from your source (DVD, HDTV Receiver, etc.) to the back
of the monitor (Red, Green, and Blue for Video, and Red for right audio and White for left audio
(The Red and white for audio will be next to each other)). Please refer to page 15 of the user
manual for additional detail.
The Audio Out on the far right of the Input box is used only to send the audio from the selected
source to an external device (Amplifier, etc.). This level can be fixed or variable depending on the
menu setting (see page 48 in the user manual to set). Please select “Fixed” if you are connecting
to an external source with a volume/level control, or select variable if the source does not have a
volume/level control.
…Using the Remote Control for the MX-27X1, select the following:
Press
MENU
Select
SOUND
Verify the Speakers are set to
ON
…You may also want to verify that the source you are using has the audio enabled properly. You
can sometimes verify this by connecting the audio from your device to another monitor or audio
system.
