11
Basic Operation
Turn On/Off
When the unit is given an audio signal
to any source input, it will turn on
automatically after 5 seconds. Make sure
audio sound is in an intermediate loudness
level to trigger auto-on function.
Turning the System ON/OFF
Either,
1) Press the button on the unit; or
2) Press the ON/OFF button on the remote
control.
Note:
When turning the system on, the system will
continue in the mode was set last time.
Note:
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
POWER light indicator:
POWER/SOURCE
Standby Source
RED
RCA Source
Amber
LINE IN Source
White
The unit will switch to standby mode when
the audio cables are disconnected or
when you turn off TV/external device after
several minutes.
Select Sources
HDMI
Either,
1) Press HDMI button on the remote control;
or
2)
button on the unit,
will allow you to select HDMI source input
from HDMI 1,2 or 3.
HDMI IN
HDMI 1
HDMI 2
Amber
HDMI 3
White
Red
Optical/ARC
Either,
1) Press Optical/ARC button on the remote
control; or
2) button on the unit,
will allow you to select Optical source input
or activate ARC function for watching
broadcasting TV program.
OPTICAL/ARC light indicator:
OPTICAL/ARC
OPTICAL
ARC(Audio Return Channel)
Amber
White
RCA/LINE IN
Either,
1) Press RCA/LINE IN button on the remote
control; or
2)
button on the unit,
will allow you to select RCA or LINE IN source.
RCA/LINE IN light indicator:
RCA/LINE IN
RCA
LINE IN
Amber
White
Adjust Volume Level
Either,
1) Press the VOL +/- button on the remote
control; or
2) Press / button on the unit,
to increase or decrease the volume level.
If the unit is connected to the TV headphone
jack, you can control the Volume Level
using the TV remote control.
If the unit is connected to TV HDMI jack
with CEC(Customer Electronics Control)
function enabled. The sound of the unit can
be controlled by the TV remote control.
