EN
EN-8
Getting Started
To Replace the Remote Control Battery
(A): Press down the flip on the left.
(B): Pull out the battery tray and remove the old battery.
(C): Place a new CR2025 battery into the battery tray with correct
polarity (+/-) as indicated.
(D): Insert the tray back into the slot.
Precautions Concerning Batteries
• When the Remote Control is not to be used for a long time (more than a month),
remove the battery from the Remote Control to prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment and
replace the batteries with new ones.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries.
Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a rechargeable type.
Placement and Instal
ment
As the unit can be used either a single sound bar or a 2-piece tower speakers.
•
Placement
- You are suggested putting the unit with below options:
Option - A
Option - B
Getting Started
•
Stand Instal
ment
(if using option-A)
Main Unit (Right)
Main Unit (Left)
Stand (Left)
Stand (Right)
•
Horizontal Instal
ment
