Specification
PA1375-00
6
7
*1: When pairing is performed for the
first time after purchase, it will be in
paring mode immediately after the
power is turned on. When paring the
second device, it will be in pairing
mode approximately 30 seconds after
the power is turned on.
*1: When the main units and the charging case are fully charged, the playback time is a
maximum of 22 hours for a total of 4 times, where 1 time for the main units and 3 times for
charging from the charging case.
1.
Press and hold the multi button on the main unit L or R for approximately 3
seconds to turn the power off.
2.
Press and hold the multi buttons of the main units L and R for approximately
15 seconds, and release when the indicator LED flashes twice in purple.
3.
Set the main units L and R in the charging case.
4. Please carry out pairing according to the procedure in How to Use
<Paring and connecting>.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
flashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.
*2
After connect, the display
lamp will flash blue slowly.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
Unable to
charge
Caution
· When the Bluetooth connection is not made and about 2 minutes elapses, the
power turns off automatically.
*4: If it does not connect automatically, please select "MXH-BTW1000" from the
list displayed on your Bluetooth device.
*
2: If it does not connect automatically, please select "MXH-BTW1000" from the list
displayed on your Bluetooth device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED starts
flashing.
2. After a while, the LED of the main unit (L) starts to flash red and blue
alternately .
* 1
The main unit (R) flashes in blue slowly.
3. Activate Bluetooth on your Bluetooth device.
*For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW1000" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator LED flashes slowly.
Caution
*
3: Password may be called passcode, passkey, PIN code, etc.
●
Pairing mode lasts for approximately 1 minute, and if it is not paired during
that time, it will become standby mode.
●
Password
*3
input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●
This product can simultaneously store up to 8 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
Or, while the power is off, press
and hold the multi buttons on
the main unit L approximately
6 seconds
Power ON
Left Channel
Right Channel
Paring Mode
Remove the main units from
the charging case
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light flashes
→
Blue light and
Red light flash
alternatively
Main unit R: Blue
light flashes
slowly
Main unit L
:
Blue
light flashes
main unit R
:
Blue
light flashes
slowly
Main unit LR:
Blue light flashes
slowly
Main unit LR:
Blue light flashes
slowly
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled
*4
Music Playback
Receiving a call
Ending a call
Press the Multi Button on the main unit L or R during a call
The other party disconnects the call
Function
Operation
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
· Depending on your Bluetooth device, the operation may differ or may not be usable.
· Depending on your Bluetooth device, the operation may differ or may not be usable.
The power
does not
turn on
No sound
Sound is
distorted
or
interrupted
・
Please reduce the volume of the connection device and this unit.
・
Please turn off the functions such as bass boost of connection device.
・
Remove any obstacles between the connection device and this unit.
・
Keep the connection device close to this unit.
・
Please keep away from radio equipment or microwave ovens.
Cannot hear
the voice on
the phone
・
Please press the Multi Button to receive the call.
・
Make sure that the Bluetooth device supports HFP or HSP.
Troubleshooting
・
Insert the main units into the charging case and remove them
from the charging case.
・
Press and hold down the Multi Button for about 3 seconds.
・
Please charge the product.
・
Please pair and connect Bluetooth.
・
Power is not turned on. Press and hold the multi buttons for
approximately 3 seconds.
・
Check to see if the connected device supports Bluetooth profile A2DP.
・
Check if the Bluetooth device is playing.
・
Please increase the volume of the Bluetooth device slowly.
・
Insert the charging cable until the end of the charging terminal.
・
Remove the main units from the charging case and place the main
units in again.
・
Remove dirt from the main units and charging case contacts.
・
Charge within the charge temperature range
（
5
℃
to 40
℃）
.
※
Specifications and appearances are subject to change without prior notice for improvement.
※
This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license.
The names, logos, and service marks are registered trademarks and trade names of maxell
or their respective owners.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Caution
Caution
■
Hands free call
■
■
<Connection after the second time onward>
Common function
Or, while the power is off, press
and hold the multi buttons on
the main unit L and R for
approximately 3 seconds
Power On
Left Channel
Right Channel
Main Unit LR
:
Light OFF
Main Unit LR
:
Red light ON
Guidance
sound
Power On
Remove the main units from
the charging case
Main Unit L
:
Blue light flashes
Main Unit R
:
Blue light flashes
slowly
Power OFF
Power OFF
Place the main units into the
charging case
Or, press and hold the multi
button on the main unit L or R
for approximately 3 seconds
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function
Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song
*5
)
Press the multi button on main unit L or R
twice in succession
Press the multi button on main unit L or R
three times in succession
Press the multi button on the
main unit L or R to operate play and pause
Display lamp
Function
Operation
<How to operate>
Press the Multi button on the main unit L or R when
receiving a call
<Pairing and connecting>
5
How To Use
At the time of purchase, size M earpiece are attached to the main unit.
If size M does not fit your ears, please replace with the size XS, S or size L
earpiece in the contents.
If the earpiece does not fit correctly, it will not be possible to seal the
ear hole with the earpiece, which may cause sound leakage and no bass
to be heard. Also, if you feel that the volume is low, there is a possibility of
sound leakage.
<Choosing an earpiece>
Headphone
specification
Wireless
specification
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx.
5.5 hours, Continuous standby:
approx. 100 hours.
charging case charge main units for
approx. 3 times
*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3.5 hours
Main Unit: Approx. 5g x 2
Charging Case: Approx. 45g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
SBC, AAC
Sealed dynamic type
SCMS-T
Max. up to 8 units
Earpieces (XS/S/M/L 2 units each)
※
M size are attached to the main units.
Charging cable (USB A-Micro B approx.
45cm) x1, instruction manual, Quick start
guide
Driver unit
Model
Power supply
Duration
Charging time
Weight
Accessories
Communication
method
Communication
distance
Supported profile
Supported codecs
Supported content
protection
Multi-paring
Audio frequency
response
In order to use this product, it is necessary to pair with your
Bluetooth device. Once pairing is done, you can connect without
pairing again.
