MXH-BTW1000
3
4
Name of Each Part
018 -190059
D19-0008018
Wireless Earphone
Bluetooth
®
1
2
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on the main units turn red and charging starts. The
indicator LED on the charging case shows an indication of the battery
level.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2 hours)
2. Charging of the charging case starts and indicator LED flashes.
3. Charging is completed when the indicator LED turns off. (Charging
time: about 3.5 hrs)
4. Remove the charging USB cable.
Charging Cable
AC adaptor
Charging
（flash）
Charging
completed
（Light off）
Main Unit (Lx1pc
,
Rx1pc)
Charging Case
(USB-A−Micro-B approx. 45cm) x 1pc
※
Please do not use other cables except attached cable for charging.
※
Connect the charging cable after checking the terminal direction carefully. If you
connect incorrectly, the terminals may be damaged.
※
Please use 5V DC power supply based on USB standard for a USB port.
※
If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※
Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※
It cannot be operated while charging.
※
When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
Microphone
Charging Case’s terminal
for charging
<Charging the charging case>
<Charging the main units>
Connection diagram
Battery Case
■
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Earpieces (XS/S/M/L 2 units each)
* M is attached to the main unit
Contents of the package
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
In case of accident, seek medical attention immediately.
The surface of equipment and parts may deteriorate, result in
causing fire. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may affect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause traffic accident as hard to hear surroundings.
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result
in hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and
domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as
blindness, injury, burns (high temperature burns/low temperature burns,
chemical burns), electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn off the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause fire or electric shock.
Fire, electric shock, injury may occur.
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury
*1
and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury
*1
.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury
*2
or there is a possibility that
property damage
*3
may occur.”
Safety Caution
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specifications may be subject to change without prior notice.
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specification. We assume no responsibility if use
outside Japan.
About the user manual
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and/ or systems, Maxell do not responsible for any injuries or fire
accident cause by the failure of this product.
Charging Cable
Quick Start
Guide
User Manual
(This
Document)
It may cause leakage, overheating, fire or breakage.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or fire.
Caution
station for moving object identification from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specific low-power radio station or an amateur radio station for
moving object identification from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certified as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certification making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specific low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identification that are used in industrial,
scientific, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specific low power radio station or any amateur radio station
for moving object identification are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
Main Unit
Multi Button
Indicator LED
Indicator LED
Micro USB terminal
for charging (back)
Earpiece
USB port of PC
Back
Front
Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
1. Connect the supplied charging USB cable to the charging case.
and to the USB port of PC or USB adapter.
