Headphone
specification
Wireless
specification
Diameter 7mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx. 12 hours,
Continuous standby: approx. 140 hours
Approx. 3 hours
Approx. 14g (Including cord)
Approx. 10m
Bluetooth Ver. 5.0
A2DP, AVRCP, HFP
SBC
Sealed dynamic type
SCMS-T
Max. up to 2 devices
Max. up to 8 devices
Eartips (S/M/L 2 units each)
※
M size are attached to the main units.
Earbuds with fins (M/L 2 units each)
※
M size are attached to the main units.
Earbuds without fins (2 units each)
Charging cable (USB A
−
MicroB approx.
25cm) x1, instruction manual x1
※
Specifications and appearances are subject to change without prior notice for improvement.
※
This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
■
Music playback
PLAY / PAUSE
Press Multi Button to change play and pause
Volume UP
Volume DOWN
Press the – Button
Next song (proceed to the
next song)
Press and hold down the + Button for about
1 second
Previous song (return to
the beginning of the
Press and hold down the – Button for about
1 second
*4: If the button is pressed at the beginning of the song, it will proceed the previous
song.
*3: If it does not connect automatically, please select "MXH-BTC14" from the list
displayed on your device.
Caution
When the Bluetooth connection is not made and about 2 minutes elapses, the
power turns off automatically.
Function
Operation
Hands free call
To receive a call: Press the Multi Button when receiving a call.
To end a call: Press the Multi Button during a call.
Caution
Depending on your device, the operation may differ or may not be usable.
<How to use>
Receiving a call
Ending a call
Press the Multi Button when receiving a call
Press the Multi Button during a call
The other party disconnects the call
Volume UP
Volume DOWN
Function
Operation
currently playing song*
4
)
Used unit
Driver Type
Power supply
Duration
Charging time
Weight
Accessories
Communication
method
Communication
distance
Supported profile
Supported codecs
Supported content
protection
Multipoint
Multi-pairing
Audio frequency
response
<Pairing and connecting>
In order to use this product, it is necessary to pair with your device.
Once pairing is done, you can connect without pairing again.
<Connection after the second time onward>
1.
2.
Press and hold down the Multi Button for about 3 seconds from
the power OFF state.
When the power turns ON, the blue indicator flashes
*2: Password may be called passcode, passkey, PIN code, etc.
The pairing mode ends in about 2 minutes, and if it is not paired during
that time, it would turn off automatically.
you can pair it by entering "0000".
This product can simultaneously store up to 8 paired devices.
When more than 8 pairings are attempted, the information of the 1st
stored device is erased and is replaced by the newly paired
device. If you want to use a device whose information has been
erased, please pair it again.
Password input may be requested by your Bluetooth device. In that case,
*
2
Caution
If 2 mobile phones are in standby mode at the same time, you can
receive phone calls from either one of the two mobile phones with
this product.
Multipoint function
1.
2.
3.
4.
Pair this product with the first mobile phone. Please refer to
<Pairing and connecting> for how to operate.
Turn off the Bluetooth function of the first mobile phone.
Pair this product with the second mobile phone.
Turn on the Bluetooth function of the first mobile phone.
Now both mobile phones will be on standby mode at the
same time.
<How to set>
5
Press the + Button
Common function
Function
Operation
Voice
Guidance
Press and hold the Multi
Button for about 3 seconds
Press and hold the Multi
Button for about 3 seconds
Power On
POWER ON
POWER OFF
Power Off
After red LED light
up, it turns off
After blue LED light
up, it flashes
<How to operate>
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license. The names, logos, and
service marks are registered trademarks and trade names of maxell or their respective
owners.
Depending on your device, the operation may differ or may not be usable.
Caution
Depending on your device, the operation may differ or may not be usable.
Caution
At the time of purchase, size M eartips areattached to the main unit.
If size M does not fit your ears, please replace with the size S or size L
eartips.
If the eartips does not fit correctly, it will not be possible to seal the
ear hole with the eartips, which may cause sound leakage and no bass
to be heard. Also, if you feel that the volume is low, there is a possibility of
sound leakage.
<Choosing eartips>
1.
2.
3.
4.
5.
Press and hold the Multi Button for about 7 seconds from the power
OFF state.
(The blue LED light up in about 3 seconds and the power turns on,
but please continues to press and hold.
When pairing mode is on, the indicator LED flashes red and blue
alternately.
Enable Bluetooth on your device.
※
For details on setting, please refer to the instruction manual of the
device.
Select "MXH-BTC14" from the list displayed on your device.
When pairing is completed, the blue indicator light flashes slowly.
＜
Wearing headphones
＞
Wear the earphone with R
on the right ear and the
earphone with L on the left
ear.
■
■
■
Voice
Guidance
PAIRING
CONNECTED
CONNECTED
DISCONNECTED
Pairing
mode
Press and hold the Multi
Button for about 7 seconds
while the power is off
Disconnect
Disconnect the product
from your device (or disable
Bluetooth)
Pairing
complete
Pair this product from your
device. Please refer to
<Pairing and connecting>
Connect
After pairing is completed,
automatically connects if
Bluetooth of your device is
enabled*
3
Blue and Red LED
flash alternatively
Blue LED flashes
Blue LED flashes
slowly
Blue LED flashes
slowly
Indicator LED
Function
Operation
Standby
mode
Turn on the power to enter
standby mode
Blue LED flashes
Disposal of rechargeable batteries in Japan
The built-in rechargeable battery can be recycled.
Do not remove the rechargeable battery yourself, please
contact our Customer Service Center.
Please refer to the JBRC website for information on
rechargeable battery collection / recycling and recycling
partners.
Caution
Press the + Button
Press the – Button
How To Use
5
The power
does not
turn on
·
Press and hold down the Multi Button for about 3 seconds
·
Please charge the device
No sound
·
Please pair and connect Bluetooth
·
Make sure that the Bluetooth device supports A2DP
·
Check if the Bluetooth device is playing.
·
Please increase the volume of the Bluetooth device slowly
Sound is
distorted
or
interrupted
·
Please reduce the volume of the Bluetooth device and this unit
·
Please turn off the functions such as bass boost of Bluetooth device
·
Remove any obstacles between the Bluetooth device and this unit
·
Keep the Bluetooth device close to this unit
·
Please keep away from radio equipment or microwave ovens
Unable to
charge
·
Please insert the charging cable completely
·
Please charge within the charging temperature range (5°C
〜
40°C)
Cannot hear
the voice on
the phone
·
Please press the Multi Button to receive the call
·
Make sure that the Bluetooth device supports HFP
Troubleshooting
6
Specification
7
Discard This Product
8
7
*1: If it is not connect automatically, select "MXH-BTC14" from the list displayed on your
device.
3.
4.
Enable Bluetooth on your device.
The earphone will connect automatically . After connect,
blue light will flash slowly.
*1
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Indicator LED
S
M
L
R
L
