GET STARTED
Turing the MXH-BT600E ON/OFF
1. In standby mode, press and hold the Multifunctional button for 3-5 seconds until a beep sound is
heard to turn the unit ON, the Indicator LED will flash blue 3 times.
2. To turn the unit OFF, press and hold the Multifunctional button for 3 seconds until a beep sound is
heard.
Don’t forget to turn off the Bluetooth feature on your phone or multimedia player.
Pairing the MXH-BT600E
Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone.
The pairing procedures are subject to different models of cell phones. Please refer to your cell phone
user’s manual for further information. The general pairing procedures are as follows:
1. Keep your headset and phone within 1 meter when pairing;
2. Press and hold the MULTIFUNCTIONAL button for about 8 seconds to pair MXH-BT600E when it
is off. The LED will flash red and blue alternatively. Your Bluetooth enabled device can scan and
connect
to “MXH-BT600E”
3. After successfully connecting, the blue LED flashes twice every 4 seconds or flashes three times
every 4 seconds.
OR
4. Plug 3.5mm audio cable from your device to the headphone.
5. Music playing through cable is available with MXH-BT600E.
Remarks:
If pairing is failed, please turn off the headset first and then re-pair according to steps 1~3 mentioned
above.
After pairing is successful, the headset and the mobile phone will remember each other, they will not
need to re-pair next time.
Every time the headset is turned on, it will connect to the last connected device automatically. If you
want to pair it with other devices, please turn off the Bluetooth function of last connected devices first
and pair the headset with the new device according to steps 1
～
3 mentioned above.
