Maxell MP-TW3001, User Manual

Page: 4 / 22

4
Regulatory notices (continued)
Product label
The position of the label is shown in the drawing below.
‡7KLVSURMHFWRULVFODVVL¿HGDVDFODVVODVHUSURGXFWWKDWFRPSOLHVZLWK
IEC60825-1:2014 and JIS C 6802:2014, and as a class 2 laser product that
FRPSOLHVZLWK,(&,PSURSHUKDQGOLQJPD\FDXVHLQMXU\%HFDUHIXO
of the following.
• If an abnormality occurs in the projector, turn it off immediately, unplug the power
cord from the outlet, and consult your dealer or service company. If you continue
WRXVHLWLWPD\FDXVHQRWRQO\HOHFWULFVKRFNRU¿UHEXWDOVRYLVLRQGLVRUGHU
• Do not disassemble or modify the projector. The projector has a high-power
laser device inside. It may cause serious injury.
• Do not look into the beam while projecting an image. Do not look into the lens
WKURXJKRSWLFDOGHYLFHVVXFKDVPDJQL¿HUVRUWHOHVFRSHV,WPD\FDXVHYLVLRQ
disorder.
• Make sure that nobody is looking into the lens when you turn on the projector by
remote control away from the projector.
• Do not let children operate the projector. If children could possibly operate the
projector, they must be accompanied by an adult.
‡'RQRWH[SRVHRSWLFDOGHYLFHVVXFKDVPDJQL¿HUVRUUHÀHFWLRQPLUURUVWRD
projected image. It may cause bad effects on the human body if you continue to
XVHLW,WPD\DOVRFDXVH¿UHRUDFFLGHQWV
• Do not disassemble the projector when you dispose of it. Dispose of it according
to laws and regulations of each country or region.
CAUTION
Ź8VHRIFRQWUROVRUDGMXVWPHQWVRUSHUIRUPDQFHRISURFHGXUHV
RWKHUWKDQWKRVHVSHFL¿HGKHUHLQPD\UHVXOWLQKD]DUGRXVUDGLDWLRQH[SRVXUH
Laser evaluation standard:
IEC60825-1: 2007, IEC60825-1: 2014,
EN60825-1: 2014
MP-TW4001:
,QWHUQDO/DVHU6SHFL¿FDWLRQV
Max. Output: 95W
Wave Length: 449 - 461nm
MP-TW3001:
,QWHUQDO/DVHU6SHFL¿FDWLRQV
Max. Output: 71W
Wave Length: 449 - 461nm
As with any bright source, do not
stare into the direct beam,
RG2 IEC 62471-5:2015.
Laser Aperture