12
QM00112-1
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (
18
).
Command Control via the Network
LAN
Connection
1.
Turn off the projector and the computer.
2.
If you use wired LAN, connect the projector's
LAN
or
HDBaseT
TM
port to
the computer's LAN or
HDBaseT
port with a LAN cable. Use the cable that
IXO¿OOVWKHVSHFL¿FDWLRQVKRZQLQ¿JXUH,I\RXXVHZLUHOHVV/$1LQVHUWWKH86%
wireless adapter into the
WIRELESS
port of the projector.
3.
Turn the computer on, and after the computer has started up turn the
projector on.
NOTE
• If data is transferred via wireless and wired LAN at the same time, the
projector may not be able to process the data correctly.
Command Control via the Network
• LAN cable (CAT-5e or greater)
or
• For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
USB wireless adapter
WIRELESS
port
LAN
or
HDBaseT
port
