12
English
Hot undocking using the Control Center:
1. Make sure the computer’s hot key driver is installed for hot docking/undocking the system.
2. Press the
Fn + Esc
key combination to run the
Control Center
.
3. Click the docking icon
in the Control Center (the icon displays the current docking status).
4. The docking icon will change to the undock icon
to display the current status and the
Undock Complete
message will
appear in the notification area of the taskbar.
Figure 9
- Using the Control Center to Hot Undock the Computer
5. Press the
Fn + Esc
key combination to run the
Control Center
.
6. The docking power LED will be
Orange
at this point and the ports, buttons and attached devices on the docking station
will not work
.
7. If you do not wish to separate the notebook and docking station at this point you can click the icon
in the Control Center to redock the
system.
8. Follow steps
2 to 5
of the cold undocking procedure on
page 10
to complete the undocking process.
1
2
3
1
1
2
3
Battery Condition
Note that if you attempt to hot
undock the system when the
battery level is low (default be-
low 10%) you will receive an er-
ror message. In this case shut
the system down to cold undock
the notebook from the docking
station, or let the battery charge
sufficiently until it is no longer
classed at a low level.
Summary of Contents for M-BOOK 6000 G3
