Maxcom MM238 3G, User Manual

Page: 45 / 61

45
any wrong PIN code three times, type the PUK code you
have received from the provider, and then type your new
PIN; you will be asked to type this code every time you
switch on the phone.
•
PIN2: to get the PIN2 code, contact your service provider,
•
Lock the phone: you can enable/disable locking the
phone. Every time you switch on the phone, you will be
required to type the phone lock code.
•
Default code is 1234.
•
Update the phone code: Default phone code is 1234.
Remember to update the phone code immediately.
•
Protecting your privacy: after switching on, selected
options will be secured by a code.
•
Lock by using the End Call button – pressing in
Idle mode will lock the keypad
•
Established number
•
Blacklist: Any number might be added to the blacklist. If
the feature is enabled, every incoming phone call from a
blacklisted number will be rejected.
16.4
Call Settings
Menu->Settings-> Call Settings
16.4.1
Call Forwarding
It is a network service. If your provider offers such a service,
configuration will be required. The user might direct incoming calls
to be forwarded directly to voicemail or to any other number.