![Maxcom MM237 User Manual Download Page 17](http://html1.mh-extra.com/html/maxcom/mm237/mm237_user-manual_1743283017.webp)
17
5.4
Removing the Battery
Switch off the phone. Press the back cover and move it
downwards, slightly lift the battery and remove it.
After removing the battery, any settings and data saved on the
card or on the phone might be lost. Remove the battery only while
the phone is switched off. Doing otherwise might cause the phone
to malfunction.
5.5
Charging the Battery
1. Plug the charger into a power outlet.
2. Plug the charger into a jack at the bottom of the phone. A
battery icon will start blinking after the charger is properly
connected.
After the battery is fully charged and the battery icon stops
blinking, unplug the charger.
If the battery is about to get discharged, the phone will emit a
warning
beep
(if
the
feature is enabled
in
Profiles
->Options->Other Alert Sounds); when the battery get discharged,