7
When the battery is almost discharged, the phone emits a warning beep. As soon as the battery is
discharged, the phone will automatically switch off. Do not leave the battery discharged for a long
time, as doing so might negatively impact the battery quality and the battery life. To ensure the
phone works properly, use only the charger recommended by the Manufacturer. While charging,
keep the back cover in place. While charging, keep the phone in a well ventilated area with air
temperature between 0°C ~ 45°C.
If the battery is totally discharged, it might take several minutes
for the battery icon to appear on the LCD and the phone to be ready to work again.
Getting Started
Press and hold the End Call key
to switch on/off the phone.
1. After switching on the phone, an input text window will be displayed on the LCD for you to enter
the phone security code and the PIN (if security features are enabled). After the PIN and the phone
security code (default phone security is
1122
) are entered, the phone will go into the Idle mode.
If you make a mistake while entering the PIN and the phone security code, you might clear your input
by pressing the RFK (Right Function Key).
After switching on the phone, available network(s) is/are automatically searched for.
As soon as an authorized network is detected, the network name and signal strength will be
displayed on the LCD. If there is no network available, only emergency phone calls and phone’s non
-
calling features are allowed.
Making Phone Calls
In Idle mode, enter the phone number you wish to dial.
Press the Right Function Key [Delete] to delete any errors. If there is at least one SIM Card installed in
the phone, press the Make Call key
to make a phone call.
1.
Making international phone calls
To make an international phone call, dialing „00” or „+” is required before dialing the actual number.
To enter „+” press the key [*]
2.
Dialing a number from the Phonebook
Press Menu to enter the Phonebook, use navigation keys Up/Down to find a Contact, or press the
first letter in the Contact
’s name
to access the list of Contacts with names starting with this letter,
and then select the Contact you wish to dial.
3.
Dialing a number from Call Log
Enter the Call Log (press the Make Call key
in Idle mode or enter via Menu), use navigation keys
Up/Down to select the Contact you wish to dial.
