ENGLISH
9
If within 30 seconds during programming, do not press any key, the phone
will leave the menu.
Enter the menu and navigate through them you can only in standby mode -
on-hook.
8.1
Setting the dialing mode Pulse / Tone
The camera is factory set to tone dialing, which is currently the vast majority of
central and which allows the use of the additional services offered by the
operators.
To change the dialing mode Pulse or Tone select the MENU DIAL MODE option,
then press OK / DIAL. Use the
or select the appropriate mode (PULSE - for
pulse dialing, TONE - for dial tone) and confirm with the OK / DIAL.
8.2
Date and time settings
When the function is activated caller ID in FSK and the phone receives a signal
identifying the calling number, the date and time will be automatically set
according to the data transmitted from the central city.
To set the date and time in the camera menu, select TIME / DATE and press OK
/ DIAL. The display shows "ENTER TIME". Use the
or adjust the time, press
OK / DIAL. Keys and set the minutes and press OK / DIAL. The display
shows "ENTER DATE". Then set the month (using
and ), Confirm by
pressing the OK / DIAL. Using and set the date and confirm with OK / DIAL.
8.3
Setting the display contrast
To change the display contrast, in the phone menu, select LCD Contrast and
press OK / DIAL. The default contrast is set at 3 Use the and select the
desired contrast level (1 to 5) and confirm with OK / DIAL.
8.4
Setting the flash time
Flash (pause calibrated) allows you to use the additional features offered by the
operator, or an internal panel. Setting the flash time depends on the standards of
the local telephone network or PBX exchange. Please check with your provider or
check the manual of internal control that is required FLASH time.
During a call signal is sent by pressing the FLASH FLASH KEY. You can set the
time FLASH: 80/100/270/300/600 ms. The default is 100 milliseconds.
To change the flash in the camera menu, select FLASH and press OK / DIAL,
and then using the keys
and FLASH set the time and confirm with OK /
DIAL.
8.5
Setting area code
In some countries (this does not include Polish) must be programmed local area
code phone to distinguish between incoming local calls from long distance. Then
