4-4
INSTALLATION
www.maxcessintl.com
MAGPOWR GTS Load Cell
MI 850A347 1 A
Adapter kit installation
WARNING – Danger of injury from crushing.
Maintenance and repair tasks on the load cell device must
be performed only when the machine has been stopped
and has been secured from being turned on again.
CAUTION – Possible damage to load cell.
The Adapter Kit must be installed on the load cell after the
pillow block mounting holes are drilled and tapped.
DO NOT drill and tap holes with the Adapter Kit installed
on the load cell.
TA1 and TA2 Installation
The TA1 and TA2 T-Slot Adapter kits can be installed on any GTSAM
load cell.
1.
Position the (2) T-Slot rails over the (4) mounting holes in the top
of the GTSAM load cell
2.
Install the (4) screws through the counter-bored holes in each rail.
TA3 Installation
The TA3 Blank Top Plate Kit can be installed on any GTSBM load cell.
1.
Drill and tap holes in the top plate adapter to accommodate the
mounting of the pillow block.
2.
Position the TA3 adapter over the (4) mounting holes in the top of
the GTSBM load cell
3.
Install the (4) screws through the counter-bored holes in the
adapter plate.
