3–2
INSTALLATION
www.maxcessintl.com
MAGPOWR DTR-65
MI 850A349 1 D
Mechanical installation
continued
1.
Remove the panel jacks from the back of the DTR-65.
2.
Install the DTR-65 into a standard 1/8 DIN cut-out 92 x
45 [3.62 x 1.77] (Figure 1). Make sure the gasket is
between the DTR-65 front panel and the panel into
which the DTR-65 is being installed to maintain the IP-
65 rating on the DTR-65 front panel (Figure 2, page 3-
3).
Figure 1. DTR-65 dimensions.
continued
