5–4
PARAMETERS
www.maxcessintl.com
MAGPOWR DLCA
MI 850A348 1 E
Password
Parameter # Description
Range
P.00
Password
When the DLCA is locked, all parameters will be viewable but
cannot be changed and no calibrations can be performed.
To lock or unlock the DLCA press [
] to show the lock or unlock
status, displayed as ULOC for unlocked and LOC for locked.
To lock the DLCA the password must be entered twice. To
unlock the DLCA the password only needs to be entered once.
To lock the DLCA
Press [
] again and the display will show PAS1, press [
] and
enter the password using the [+] and [-] buttons. Press and
hold [
] for two seconds to enter the password.
The display now shows PAS2. Press [
] and enter the same
password using the [+] and [-] buttons. Press and hold [
] for
two seconds to enter the password.
The display now shows LOC for locked. Press [
] to return to
displaying tension.
To unlock the DLCA
Press [
] again and the display shows PAS1. Press [
] and enter
the password using the [+] and [-] buttons. Press and hold [
]
for two seconds to enter the password.
The display now shows ULOC if the correct password was
entered. Press [
] to return to displaying tension.
If the password was incorrect, the display shows LOC and the
DLCA is still locked. Press [
] to return to displaying tension,
and then repeat the unlock procedure.
{0, 9999}