SAFETY INSTRUCTIONS
www.maxcessintl.com
DLCA NET-S1
MI 850A374 1 A
Page 10 of 67
2.0
Safety
2.1
Instructions for use
To ensure safe and problem free installation of the digital load
cell amplifier, the digital load cell amplifier must be properly
transported and stored, professionally installed and placed in
operation. Proper operation and maintenance will ensure a long
service life of the device. Only persons who are acquainted with
the installation, commissioning, operation and maintenance of
the system and who possess the necessary qualifications for
their activities may work on the digital load cell amplifier.
Note: The safety information may not be comprehensive.
Please note the following:
-
The content of these operating instructions
-
Any safety instructions on the device
-
The machine manufacturer’s specifications
-
All national, state, and local requirements for installation,
accident prevention and environmental protection
2.2
Symbols used
The following safety identification symbols are used in
these operating instructions.
WARNING/CAUTION – General danger or important note
Reference to general hazards that may result in bodily
injuries or damage to device or material.
WARNING/CAUTION – Danger due to crushing
Reference to danger of injury caused by crushing.
WARNING/CAUTION – Danger due to cutting
Reference to danger of injury caused by cutting.
WARNING/CAUTION – Danger due to voltage, electric shock
Reference to danger of injury caused by electric shock due
to voltage.
WARNING/CAUTION – Danger due to hot surfaces
Reference to risk of injury caused by burning.
