Maxcare 360 Smart Skipping Robo, User Manual

Page: 34 / 36

P.09
Error Reason Solution
The remote
control
cannot control
the
POWERHOP
If the abnormal situations remain unsolved after taking above solutions, please
contact us.
POWERHOP
stops working
Unable to
charge
Battery voltage too low. Replace with new battery
The remote control is
out of order.
Send for repairing.
Power plug not matching. Use 5V transformer
The manual switch is off. Switch to ON
The POWERHOP is out
of order.
Send for repairing.
The insulation sheet at
battery not removed yet
Remove the insulation sheet.
The
POWERHOP is
out of order.
The battery is dry out Charge the unit before using
POWERHOP is blocked
from spinning
Switch off the unit and
turn on.
POWERHOP is damaged Send for repairing.
The POWERHOP is out of
order.
Send for repairing.
The USB cable is damaged. Use new USB cable.
Battery voltage too low. Charge the unit before using
The remote control is not
pointing to the receiver.
Remove the insulation sheet.
FAQs and Solutions
?